All Type of Module

Showing 1–18 of 246 results

12V 3A Touch Sensor Switch For Mirror Light

SKU: SE77973
120.00 (Incl. Tax)
  • 12V 3A Touch Sensor Switch for Mirror Light
  • Output Line : 3 Line 150mm
  • Input Line: Double Line 300mm
  • Voltage: 12V
  • Function: White Warm Two-Color Infinite Dimming

24V DC 1/2 Electric Solenoid Water Air Valve Switch (Normally Closed)

SKU: SE45794
330.00 (Incl. Tax)
  • Rated Operating Voltage: 24V DC
  • Rated Current: 0.6A
  • Operation Mode: NC (Normally Closed)
  • Pressure: 0.02 – 0.8MPa
  • Max fluid temperature: 100°C

3.7V to 12V Mini DC-DC Boost Step Up Converter Board Module 5V/ 8V/ 9V 12V Output

SKU: SE64792
40.00 (Incl. Tax)
  • 3.7V to 12V Mini DC-DC Boost Step Up Converter Board Module
  • Input Voltage:2.5V~VOUT-0.5V
  • Output Voltage: can be set to 5V/8V/9V/12V
  • The maximum output current reaches 1A

30A Intelligent LCD Solar Charge Controller

SKU: SE59571
400.00 (Incl. Tax)

Built-in Industrial Micro-Controller

Big LCD Display

All Adjustable Parameters

Full 4 Stage PWM Charge Management

433MHz 220VAC 30A Relay Wireless RF Control Switch & 1CH 2-Buttons Remote Transmitter

SKU: SE99762
Original price was: ₹650.00.Current price is: ₹499.00. (Incl. Tax)

5A 12V Overcurrent Protection AC Current Detection Sensor Module

SKU: SE12353
180.00 (Incl. Tax)

5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current.

5V 30A 1-Channel Relay Module

SKU: SE62532
180.00 (Incl. Tax)

Specification:-

  • Relay Type: Single channel
  • Operating Voltage: 5V DC
  • Current Rating: 30 Amps
  • Current Capacity: 30A at 250V AC or 30V DC

Pinouts:

  • DC+: DC power supply positive pole
  • DC-: DC power supply negative pole
  • IN: signal triggering pin
  • JD+: relay control voltage positive
  • JD-: relay control voltage negative

Analog TDS Sensor Module

SKU: SE29931
650.00 (Incl. Tax)

TDS (Total Dissolved Solids) Water Conductivity Sensor indicates how many milligrams of soluble solids are dissolved in one liter of

BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module

SKU: SE26755
280.00 (Incl. Tax)
  1. Input voltage(V): 6 – 27.
  2. Maximum current(A): 43.
  3. Input level(V): 3.3 – 5.
  4. Duty cycle: 0 – 100%.
  5. Path resistance: 16 mΩ at 25°C.
  6. Low quiescent current: 7 µA at 25°C.

CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi

SKU: SE24565
90.00 (Incl. Tax)

Built-in USB to TTL Transfer chip.

Designed to be used for USB to TTL electronic projects.

TTL interface output, easy to connect to your MCU.

Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.

The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC

Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)