Showing 37–48 of 253 results

Sold out

HW-290/GY-87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor

SKU: SE86198
₹450.00 (Incl. Tax)
  1. 3-axis Gyro+Acceleration+Magnetic Field
  2. Air Pressure Module
  3. Power supply: 3-5V
  4. Build in ultra low noise linear LDO voltage regulator
  5. Built-in onboard filters, which reduce noise from motor and other high current electronics
  6. You can easily select two I2C address for MPU6050 by soldered jumper

Infrared Obstacle Avoidance Sensor Module

SKU: SE92175
₹90.00 (Incl. Tax)
  • Detection distance: 2-40cm
  • IO Interface: 4-wire interfaces (- / + / S / EN)
  • Output signal: TTL level
  • Adjustment: adjust multi-turn resistance
  • Effective angle: 35 °

INMP441 Omnidirectional Microphone I2S Interface Digital Output Sensor Module

SKU: SE69545
₹180.00 (Incl. Tax)
  • Digital I2S interface with high precision 24-bit data
  • High signal to noise ratio is 61 dBA
  • High sensitivity – 26 dBFS
  • Stable frequency response from 60 Hz to 15 kHz
  • Low power consumption: low current consumption 1.4 mA
  • High PSR: -75 dBFS

MAX9814 High Performance Microphone AGC Amplifier Module

SKU: SE37786
₹200.00 (Incl. Tax)
  • Supply Voltage: 2.7v-5.5v @ 3mA current
  • Output: 2Vpp on 1.25V bias
  • Frequency Response: 20Hz – 20 KHz
  • Programmable Attack and Release Ratio
  • Automatic gain, selectable max from 40dB, 50dB, or 60dB

MPU6500 Gyroscope Accelerometer Digital Motion Processor (DMP) 6-axis Motion Sensor with I2C

SKU: SE39217
₹180.00 (Incl. Tax)
  1. Acceleration and Gyroscope
  2. 6 DOF module
  3. Build-in ultra-low noise linear LDO voltage regulator.
  4. Built-in onboard filters, which reduce noise from the motor and other high current electronics.
  5. All sensors are connected to the I2C bus.
  6. Build-in the Logic level converter for I2C.
  7. Power indicator LED.
  8. Using Immersion Gold PCB, machine welding process to ensure quality.
  9. On-board pull-up resistors on SDA, SCL, and nCS
  10. On-board pull-down resistors on FSYNC and AD0
Sold out

N20 12V 600RPM Micro Metal Gear Motor With Encoder

SKU: SE44195
₹599.00 (Incl. Tax)
  • Encoder Test Wire Length: 140mm.
  • Wheel Dia.: 43 mm.
  • Rated Voltage: DC 6V.
  • Output Speed: 600RPM.
  • Milling Edge: 0.5 mm.
  • Output Shaft Size: 3 x 10mm.
  • Output Shaft type: D type.
Sold out

PAM 8610 Digital Stereo Class-D Amplifier Board 2x15W Output

SKU: SE27742
₹125.00 (Incl. Tax)
  • Dual-Channel Stereo Output
  • Run-on 7V to 15V power Supply
  • 32 Steps DC volume control has a +32dB to -75dB range.
  • 40 pin QFN 6 x 6 mm package.
  • Much higher efficiency in terms of cost and performance than competitors’ ICs

PCF8575 Remote 16 Bits I2C IIC SMBus I/O Expander Module

SKU: SE75321
₹170.00 (Incl. Tax)
  • Item Type: PCF8575
  • Operating voltage: 2.5-5.5VDC
  • Operating current: 100mA (max)
  • I2C address: 0x20 (default), can be changed by soldering A1 and selection pads A2.