Showing 145–156 of 605 results

W3230 AC110-220V Digital Temperature Controller Microcomputer Thermostat Switch

SKU: SE99863
299.00 (Incl. Tax)
  1. Display Type: Digital
  2. Temperature sensor: NTC 10K
  3. Senor length:1.0m
  4. Temperature measuring range: -50° C ~ 120 ° C
  5. Resolution: 0.1 ° C
  6. Accuracy:±0.1° C

Waterproof Ultrasonic Obstacle Sensor

SKU: SE37461
260.00 (Incl. Tax)
  1. Working Voltage : 3 – 5.5V.
  2. The maximum Current : 49mA 5V.
  3. Range : 20cm to 450 cm

WSH49E Linear Hall Effect Sensor 49E Hall Element

SKU: SE16826
20.00 (Incl. Tax)
  • AH49E Linear Hall Effect Sensor 49E Hall Element
  • Hall Effect Sensor – Linear – WSH49E
  • 49E Hall Effect Sensor

XBee USB Adapter FT232RL for Arduino with Cable

SKU: SE59375
240.00 (Incl. Tax)
  • Microprocessor: FT232RL.
  • Power supply: 3.3V and 5V DC.
  • Interface: Mini-B USB, 2.54mm pitch pin header.
  • Adapter socket: XBee compatible 2.0mm pitch female pin header.
  • 3.3V and 5V IO compatible.
  • USB 2.0 protocol.
  • Easily connected to a PC via mini USB cable.
  • XBee compatible 2.0mm pitch female pin header.
Sold out

12V Electric Pressure Solar Water Heater Solenoid Valve .5 inch Normal Closed

SKU: SE51112
350.00 (Incl. Tax)

Product Description: Control mode : DC 12V. Use of media : liquid water, such as other liquid suitable for the

Sold out

2.4 inch Arduino Touch LCD Shield

SKU: SE43817
560.00 (Incl. Tax)

Arduino LCD display shield with built in microSD card connection. This TFT display is big (2.4″ diagonal) bright (4 white-LED

Cable Compatible For Arduino UNO MEGA (USB A to B)

SKU: SE18683
60.00 (Incl. Tax)

This is a Cable For Arduino UNO/MEGA (USB A to B). You can use it to connect “Arduino Uno”, “Arduino

LED Digital Display Mini DC Digital Two-wire Voltmeter (Blue)

SKU: SE85555
150.00 (Incl. Tax)

Measuring range: 5-100V Power supply range: 5-100V Minimum start-up: 3.8V Allowable error: ±1% Input impedance: >100K ohms Operating current: red

LED Digital Display Mini DC Digital Two-wire Voltmeter (Red)

SKU: SE87614
150.00 (Incl. Tax)

Measuring range: 5-100V Power supply range: 5-100V Minimum start-up: 3.8V Allowable error: ±1% Input impedance: >100K ohms Operating current: red

RS485 to TTL Converter With Automatic Flow Control Module

SKU: SE25372
90.00 (Incl. Tax)

Has a 120 ohm termination resistors, shorted R0to enable the termination resistor. Support multi-machine communication, allowing access at up to