Features
1. Wireless control, easy to install.
2.
Control Lights, Motors, Fans, electrically operated, Doors / Locks /
Windows / Blinds / Cars or Other Appliances with AC180~250V.
3. You
can turn on / off the receiver with transmitter (remote control) from
any place within a reliable distance. The wireless RF signal can pass
through walls, floors and doo
4. This switch can learn different coding remote controls (such as 2262, 1527)
5. One / several transmitters can control one / several receivers simultaneously.
6.
If you use two or more receivers in the same place, you can set them
with different codes. If you use multi-button transmitter, you can
control the controller with different buttons, it will not affect each
other.
7. The wireless receiving controller, with high
confidentiality, stable performance, low power consumption
characteristic, jump line or dial the code switch coding.

Output/working way
1. Jog, Inter-lock, Self-lock (can be change on yourself)
2.
Jog — Press one button is ON. Loosen your finger on the same button
is OFF. (Need one channel switch and one buttons remote control)
3.
Self-lock — Press one button for one time is ON. Press the same button
again is OFF. (Need one channel switch and one buttons remote control)
4. Inter-lock — Press one button is ON, press another button is OFF. (Need one channel switch and 2 buttons remote control)

About Learning and clearing
1. Jog / signal non-lock a?? Press the No.1 button to learn
2. Self-lock press the No. 3 button to learn (each channel is independent, they will not interfere with each other.
3. Inter-lock a?? Press the No.2 button to learn.
4. 1-4 button is Self-lock. 5-12 button is Inter-lock — Press the No.8 button to learn.
5. 1-6 button is Jog, 7-12 button is Inter-lock — Press the NO.4 button to learn.
6. 1-6 button is Jog, 7-12 button is Self-lock — Press the NO.5 button to learn.
7.1-4 button is Jog, 5-12 button is Inter-lock —- Press No.6 button to learn.
8.1-4 button is Jog, 5-12 button is Self-lock —- Press NO.7 button to learn.

Please note that
It
is the control system in set here. You just can choose Jog or Self-lock
working / output way here. There are 12CH and 12 buttons.

How to match
1. Press the learning the key on the receiver about 2 seconds, you will hear sound BIBI, it means into the learning state.
2.
Press the remote control function keys (keys 1-8), you will hear BIBIBI
sound. It means success in learning. Valid signal is not received
within 10 seconds automatically exit learning.

How to remove code
1.
Press the receiver module learning button about 8 seconds until BI
continuous ringing six times, it means the stored information has been
successfully cleared.