TSOP1738 IR Receiver Plastic

TSOP1738
is a infrared receiver tuned to receive IR of frequency 38 kHz only. It
is perfect for making obstacle sensors and to read signals from most IR
remotes(TV, AC, Home Theatre Remotes, etc). When used as a receiver in
distance sensors, it provides better performance as it allows better
reception and protection from ambient light compared to other IR
receivers. It can be used to read signals of most IR Remotes.

The TSOP1738 IR sensor module consists of a PIN diode and a pre
amplifier which are embedded into a single package. The output of TSOP
is active low and it gives +5V in off state. When IR waves, from a
source, with a centre frequency of 38 kHz incident on it, its output
goes low. Lights coming from sunlight, fluorescent lamps etc. may cause
disturbance to it and result in undesirable output even when the source
is not transmitting IR signals. A bandpass filter, an integrator stage
and an automatic gain control are used to suppress such
disturbances.TSOP module has an inbuilt control circuit for amplifying
the coded pulses from the IR transmitter.

The sensor can be used for Proximity detection application along with a
IR led in robotics and security systems. It receives IR signal at 38khz
frequency.

Features of TSOP1738 IR receiver :
 

• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against electrical field disturbance
• TTL and CMOS compatibility
• Output active low
• Low power consumption
• High immunity against ambient light
• Continuous data transmission possible (up to 2400 bps)
• Suitable burst length 10 cycles/burst

Specifications of TSOP1738 IR receiver:
 

• Supply Voltage: 5 V
• Power consumption: 0.4 to 1.0 mA
• Min. Ee irradiation: 0.35 mW/m2 typ.
• Angle of detection: 90
• Dimensions of the casing (mm): 12.5 x 10 x Thickness 5.8
• Temperature range: -25 C to +85 C

No Guarantee No Warranty
Product image is for reference purpose only.