This
is a basic 20 character by 4 line display. Interface code is freely
available. You will need ~11 general I/O pins to interface to this LCD
screen. Includes LED backlight.
If you want to add some visual
output to your Arduino projects, you’ll need a display. If you need
moderate data on display, the LCD2004 Parallel LCD Display is a quite
good solution for the Arduino projects.
This is an
industry-standard JHD629-204A based controlled 4 lines x 20 characters
LCD display with Black characters on Green background. It is a parallel
interface so you will need 7 pins for 4-bit mode or 11 pins for 8-bit
mode to interface to this LCD screen.
Features and Specifications:
- Wide viewing angle and high contrast.
- Industry-standard JHD629-204A equivalent LCD controller built-in.
- +5V DC supply with 33 Ohm resistor LED backlight.
- Supported 4 or 8-bit parallel interface.
- Display 4-line X 20-character.
- Operate with 5V DC.=
- Interface with 16 pins male header Connector.
- 20 characters wide, 4 rows
- Black text on the yellow background
- The module can easily interface with an MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
Package Content:
1 x 20X4 Parallel LCD Display with Green Backlight
No Guarantee No Warranty
Reviews
There are no reviews yet.