74LS163 Synchronous 4-Bit Binary Counter IC

74LS163 designed as a high-speed 4-bit synchronous counter. 74LS163 is an edge-triggered, synchronously presettable, and cascadable MSI building block. This 74LS163 IC comes as count modulo 16 (binary.) used explicitly for counting, memory addressing, frequency division and other applications. The 74LS163 come with a Synchronous Reset (Clear) input that overrides all other control inputs. But is active only during the rising clock edge.

The 74LS163 feature a 4-bit synchronous counter with a synchronous Parallel Enable (Load) functin. The counters contains four edge-triggered D flip-flops with the acceptable data routing networks feeding the D inputs. All changes of the Q outputs occur as a result of, and synchronous with, the LOW to HIGH transition of the Clock input (CP). As long as the set-up time requirements are met, there are not any special timing or activity constraints on any of the mode control or data inputs. The mode of operation selected via three control inputs. That is Parallel Enable (PE), Count Enable Parallel (CEP) and Count Enable Trickle (CET). The Count Mode enabled when the CEP, CET, and PE inputs remain HIGH.

When the PE is LOW, the counters synchronously load the data from the parallel inputs into the flip-flops on the LOW to HIGH transition of the clock. Either the CEP or CET accustomed to inhibit the count sequence. With the PE held HIGH, a low on either the CEP or CET inputs a minimum of one set-up time before the LOW to HIGH clock transition that cause the prevailing output states to retained. The AND function of the 2 Count Enable inputs (CET • CEP) allows synchronous Cascading without external gating. And at once accumulation over any practical number of bits or digits.

* Product Images are shown for illustrative purposes only and may differ from actual product.