Showing 277–288 of 1263 results

Mini MP1584 DC-DC 3A Adjustable Buck Module

SKU: SE87377
₹45.00 (Incl. Tax)
  • IC Chip: MP1584EN
  • Input Voltage: 4.5~28V
  • Output Voltage: 0.8~20V
  • Max. Output Current: 3A
  • Typical Output Voltage: 1.8A
  • Typical Switching Frequency: 1MHz
  • Maximum Switching Frequency: 1.5MHz

MOC3021 Optocoupler Traic Driver IC – DIP-6 Package

SKU: SE27135
₹20.00 (Incl. Tax)
  • MOC3021 Optocoupler Traic Driver IC
  • Output Type: PhotoTriac
  • Number of Channels: 1 Channel
  • Isolation Voltage: 5000 Vrms
  • If – Forward Current: 50 mA
  • Vf – Forward Voltage: 1.2 V
  • Pd – Power Dissipation: 330 mW
  • Off-state Output Voltage – VDRM: 400 V
  • Maximum Continuous Output Current: 100 mA

MPU6500 Gyroscope Accelerometer Digital Motion Processor (DMP) 6-axis Motion Sensor with I2C

SKU: SE39217
₹180.00 (Incl. Tax)
  1. Acceleration and Gyroscope
  2. 6 DOF module
  3. Build-in ultra-low noise linear LDO voltage regulator.
  4. Built-in onboard filters, which reduce noise from the motor and other high current electronics.
  5. All sensors are connected to the I2C bus.
  6. Build-in the Logic level converter for I2C.
  7. Power indicator LED.
  8. Using Immersion Gold PCB, machine welding process to ensure quality.
  9. On-board pull-up resistors on SDA, SCL, and nCS
  10. On-board pull-down resistors on FSYNC and AD0

MT8870 DTMF Decoder Receiver IC – DIP-18 Package

SKU: SE95297
₹90.00 (Incl. Tax)
  • Part No: MT8870
  • Power Supply Voltage: 7V
  • Voltage on any pin VSS-0.3 ~ VDD+0.3V
  • Package/Case: DIP-18

N20 12V 1000RPM Micro DC Metal Gear Reduction Motor

SKU: SE26883
₹280.00 (Incl. Tax)
  • Motor Type: Micro DC Geared Motor
  • Output Shaft: D-Shaped
  • Shaft Diameter : 3mm
  • Shaft Length: 9mm
  • Rated Speed: 1200 RPM

 

  • Gearbox Cross Section: 10 × 12mm

 

  • Operating Voltage: 12V DC

N20 12V 300RPM Micro Metal Gear Motor With Encoder

SKU: SE37438
₹550.00 (Incl. Tax)
  • Encoder Test Wire Length: 140mm.
  • Wheel Dia.: 43 mm.
  • Rated Voltage: DC 12V.
  • Output Speed: 300RPM.
  • Milling Edge: 0.5 mm.
  • Output Shaft Size: 3 x 10mm.
  • Output Shaft type: D type.