TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module

The TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module is
the simple application of Peltier Thermoelectric Effect. The module
features 127 semiconductor couples in the area of 40mmx40mm.

Thermoelectric coolers also are known as TEC or Peltier Module
create a temperature differential on each side. One side gets hot and
the other side gets cool. Therefore, they can be used to either warm
something up or cool something down, depending on which side you use.
You can also take advantage of a temperature differential to generate
electricity.

This Peltier works very well as long as you remove the heat from the
hot side. After turning on the device, the hot side will heat quickly,
the cold side will cool quickly. If you do not remove the heat from the
hot side (with a heat sink or other device), the Peltier will quickly
reach stasis and do nothing. We recommend using an old computer CPU heatsink
or another block of metal to pull heat from the hot side. We were able
to use a computer power supply and CPU heatsink to make the cold side so
uncomfortable we could not hold our finger to it.

A thermoelectric cooling
(TEC) module is a semiconductor-based electronic component that
functions as a small heat pump. By applying the DC power source to a
TEC, heat will be transferred from one side of the module to the other.
It creates a cold and hot side. They are widely used in industrial
areas, for example, computer CPU, CCDs, portable refrigerators, medical
instruments, and so on.

Also Known as Thermoelectric cooling modules, Thermoelectric modules, Peltier modules, Thermoelectric cooling module.

Operating Tips:

1. Do not exceed Imax or Vmax when operating module.
2. Please carry out moisture protection options (sealing) in final application use.
3. Life expectancy: 200,000 hours.
4. Failure rate based on longtime testings: 0.2%.

Important Note!! Heat side
requires heat sink all the time. “ Do not run this device with a power
supply more than a few seconds without a heatsink mounted to the device!
”

Features :

1. Small module.
2. Easy transition between the hot side to the cool side and vice-versa just by reversing the polarity of supply.
3. Quality tested cooling cells.
4. Solid state, vibration free, noise-free.
5. Simple to install and operate.
6. Should use with a heat sink.

No Guarantee No Warranty