TXS0108E High Speed Full Duplex 8 Channel Logic Level Converter

TXS0108E
High-Speed Full-Duplex 8 Channel Logic Level Converter.If you’ve ever
tried to connect a 3.3 V device to a 5 V system, you know what a
challenge it can be. This bi-directional logic level converter is a
small device to convert the 1.8 V 3.3 V 5 V logic level mutually enable
you to successfully set your high and low voltages and step up and down
between them safely on the same channel.

Each
level converter has the capability of converting 8 pins on the high
side to 8 pins on the low side. The level converter provides the serial
interface compatible with UART/IIC/SPI port is very easy to use.

This 8-bit non-inverting translator uses two separate configurable power-supply rails. The A port tracks the V_CCA pin supply voltage. The V_CCA pin accepts any supply voltage between 1.2 V and 3.6 V. The B port tracks the V_CCB pin supply voltage.

The V_CCB pin
accepts any supply voltage between 1.65 V and 5.5 V. Two input supply
pins allow for low Voltage bidirectional translation between any of the
1.2 V, 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.

Features:

1. It can provide 3.3-5V, 1.8-3.3V level conversion.
2. PCB Color: Blue.
3. 8-bit bi-directional 3.3V-5V/5V-3.3V logic level converter board.
4. Serial communication interface compatible with UART/IIC/SPI port easily to connect.
5. Ship out by USPS with tracking information and 7-17 days delivery time usually.
6. Widely used in the MCU and SD card, MCU and serial devices, MCU and 5V/3V module communication.

Package includes:

1 x TXS0108E High-Speed Full-Duplex 8 Channel Logic Level Converter.

2 x 1*10 Berg Pins (Straight).

Specifications :-

Module chip	TXS0108E
VCC A side support voltage	1.2 ~ 3.6 V
VCC B side support voltage	1.65 ~ 5.5 V
Communication Interface Compatible	UART/IIC/SPI
No. of Bits	8

* Product Images are shown for illustrative purposes only and may differ from actual product.