CP2102 USB 2.0 to TTL UART serial converter Module 6 Pin

This is the
CP2102(6-pin) USB 2.0 to TTL UART serial converter module. This is a
great little tool for embedded systems that require a serial connection
to a computer. The board can simply attach to a USB bus and will appear
as a standard COM port.

ThisCP2102
doesn’t require any external oscillator, it onboard-board voltage
regulator, and it even uses a reprogrammable internal EEPROM for the
device description. The full hardware UART has flow control for baud
rates from 300bps to 921600bps.

This
breakout also allows you to connect the TX/RX pins of your favorite
microcontroller or serial application to the RX/TX pins of the breakout,
creating a simple serial cable replacement.

Supported operating systems

Features :

1. Brand new and high quality
2. Included USB transceiver, without external circuit device
3. Includes a clock circuit and power-on reset circuit
4. With 3.3V and 5V dual power output
5. With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
6. Meet the USB2.0 specification requirements
7. SUSPEND pin supports USB suspend state
8. With
   self-recovery fuse. In the event of the accidental short circuit, it
   can effectively protect your computer USB port and Downloader
9. With reset signal output, etc. directly to the Arduino board Promini download!
10. Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
11. The supported data format is 8 data bits, 1 stop bit and parity bits
12. Connotation 512 byte receive buffer and 512 bytes transmit buffer
13. Supports hardware handshaking or X-ON/X-OFF

Package Includes :