Description

• Receiver
  1.Input Voltage: DC10-14V
  2.Standby Current: <5MA
  3.RF Frequency: 433MHZ
  4.RF Working mode:Super heterodyne receiver
  5.Receiver Sensitivity: >90dBm
  6.Remote Control Distance: >100 meter(In open environment)
  7.Decoding Way: MCU Software decoding
  8.Can store the number of remote control:50
  9.Support remote control type: Fixed code, learning code
  10.Channel: 1CH
  11.Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
  12.Wiring Method:Fixed wiring terminal
  13.Working Voltage: DC12V
  14.Output Current: 10A
  15.Rated load:10A 250VAC / 10A 125VAC
  10A 30VDC / 10A 28VDC
  16.Output:Normally open,Common,Normally closed
  17.Dimension:3.5cm*3cm*1.6cmTransmitter
  1.Material:ABS Plastic
  2.Battery:23A Battery (Battery is not included)
  3.Operating voltage: 12V
  4.Frequency: 433MHZ
  5.Reference distance: 150 meters (This is the theory distance in open environment without interference, practical application due to the interference environment and decreased)
  6.Current job: 9 ~ 12mA
  7.Transmitting power: 10-15mw
  8.Frequency deviation: ± 0.2MHz
  9.Size (LxWxH): 58x38x15 (mm)Working/output way:1.Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
  2.Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
  3.Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
  4.Delay: Press remote control relay pull-in,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay

All Pictures shown here are for illustration purpose only.Actual product size may vary.