Thermistor 100k NTC with 1 Meter Cable Temperature Sensor

This is Thermistor 100k NTC with 1 Meter Cable Temperature Sensor for
3D Printer Reprap. The thermistor is a thermally sensitive resistor
known for exhibiting a large change in resistance with only a small
change in temperature.

It is important to note
that a thermistor’s change in resistance is non-linear. It follows a
pre-defined curve which is provided by the thermistor manufacturer.

Positive thermal coefficient (PTC) will increase in resistance with
an increase in temperature, negative ones (NTC) will decrease. But the
formula in practice is not linear, so sometimes an accurate table of
measurements is better than the linear formula. These measurements can
usually be found in the datasheet that accompanies the thermistor

Features :

1. 100k Ohm NTC Thermistor.
2. NTC Thin Film Thermistor Cable.
3. Nominal value: R25 (25 ℃) : (common) 1.5K, 2K, 5K, 10K, 20K, 30K, 47K, 50K, 100K, 200K, 500K, etc.
4. Resistance precision: ± 1%, ± 2%, ± 3%.
5. B value R25/50 (common) 3435k, 3600k, 3950k, 3990k, 4100k, 4200k, etc.
6. B value accuracy: ± 1%.
7. Recommend the use of parameters: R25℃ = 100 k B25/50 = 3950 k ± 1%)

Package Includes :

1 x Thermistor 100k NTC with 1 Meter Cable Temperature Sensor

No Guarantee No Warranty
Product image is for reference purpose only.