DJI Naza M Lite Multi-Rotor Flight Controller with LED, PMU, GPS

This is an all-in-one DJI flight
controller. For entry-level enthusiasts, DJI now brings out the most
cost-effective solution, the NAZA-M Lite flight control system. As the
simplified version of NAZA-M, it inherits the high reliability and
stability of NAZA-M
 

• All-In-One Design
• Advanced Attitude Stabilize Algorithm
• Multiple Flight Control Mode with intelligent Switching
• Accurate GPS Module for Position Hold
• Intelligent Orientation Control (IOC)
• Failsafe Mode
• Low Voltage Protection
• Support Futaba S-Bus And PPM Receiver
• Built-In Gimbal Stabilization Function
• Remote Adjustment

All-In-One Design

The innovative All-in-one design simplifies installation and saves
space and weight. It contains inner damping, controllers, 3-axis
gyroscope, 3-axis accelerometer and barometer in its light and small
Main Controller. It can measure flying altitude, attitude and therefore
can be used for autopilot/automatic control.

Advanced Attitude Stabilize Algorithm

The advanced attitude stabilization algorithm not only inherits the
outstanding flight stability of DJI products, but also provides
excellent maneuverability. It is more flexible and stable, and gives the
hobbyists a wonderful flight experience.

Multiple Flight Control Mode/Intelligent Switching

Naza M Lite offers three types of control modes: GPS Atti. Mode (with
GPS module), Atti. Mode, Manual Mode. The pilot can switch between the
three modes to achieve different flight characteristics. It also can
adjust automatically within the flight environment and intelligently
switch between GPS Atti. Mode and Atti. Mode to make sure the flight is
safe and secure.

GPS Module Available/Accurate Position Hold

The plug and play GPS module will greatly enhance the performance for
Aerial Photography with accurate Position Hold, Return-To-Home and
Intelligent Orientation Control functionalities. With the GPS Module,
the multi-rotor will have position and altitude locked accurately even
in windy conditions. Hovering accuracy is approximately 2.5m horizontal
and 0.8m vertical.

Intelligent Orientation Control (IOC)

Usually, the forward direction of a flying multi-rotor is the same as
the nose direction. By using Intelligent Orientation Control (IOC),
wherever the nose points,the forward direction has nothing to do with
nose direction.

Failsafe Mode

If your transmitter supports failsafe, then you can set failsafe
through port-U. Naza controller has built-in auto level failsafe
function, which means when the communication between MC and the
transmitter is disconnected, the outputs of all command sticks from
controller will go to center position. If the GPS module is used, you
can also set RTH on failsafe. If your transmitter has only 4 channels,
then MC will work in Atti. Mode by default without the failsafe
function.

Low Voltage Protection

In order to prevent your multi-rotor from crashing or other harmful
consequences caused by low battery voltage, we have designed two levels
of low voltage protection. You can choose not to use this, however we
strongly recommend you to enable the protection. Both levels of
protection have LED warning as default. The first level will blink the
red light continuously; the second level will blink red light
continuously and the multi-rotor will descend and land. In manual mode
when low voltage protection is triggered the LED warning will be active
only.

Support Futaba S-Bus And PPM Receiver

Minimum Four channel receiver supported, also PPM and Futaba S-Bus
receiver supported. PPM & S-Bus receivers (the general use of the
first 8 channels of S-Bus receiver) to optimize the channel connection.
A, E, T, R, U five-channel functions are set using channel X2. Use only
one servo cable to connect the PPM or S-Bus to X2 which makes
installation quick and easy.

Supports Multi-Rotor Types

Naza-M Lite now supports six types of multi-rotor, which meets the
different needs of the enthusiasts. Quad I, Quad X, Hexa I, Hexa V, Hexa
Y, Hexa IY

Built-In Gimbal Stabilization Function

The gimbal stabilization module is compatible with almost all 2-axis
gimbal systems. The system will adjust the gimbal and camera according
to the attitude of the aircraft after setting the parameters the first
time.

Remote Adjustment

The default parameter settings are OK for you to achieve a normal
flight, and it also supports remote parameter adjustment by using a
control slider on the TX during flight, in order to obtain better
performance.

• This is just a flight controller and not the complete multicopter
  kit. You need some basic multirotor or multicopter skills to use this
• Kit does not include batteries or charger

• 1 x DJI NAZA-M Lite with GPS Kit